How it
Works
Sizing
Formula
4 Cycle Engines | |||||||||
---|---|---|---|---|---|---|---|---|---|
Airflow Ratings(CFM) |
|
||||||||
3456 | |||||||||
Required Airflow | ******(CFM) |
Volumetric Efficiency | ||
---|---|---|
Diesel Engines | Naturally Aspirated | 0.85 |
Turbocharged | 1.60 | |
Turbocharged-aftercooled | 1.85 | |
Gasoline Engines | Up to 2500 RPM | 0.80 |
2500 to 3000 RPM | 0.75 | |
3000 to 4000 RPM | 0.70 |
4 Cycle Engines
CFM = | RPM x CID x Vol.efficiency |
3456 |
CFM - Cubic Feet Per Minute
CMM – Cubic Meters Per Minute
L- Liters
RPM - Revolutions Per Minute
CID – Cubic Inch Displacement
4 Cycle Engines
CMM = | RPM x L x Vol.efficiency |
2000 |
Conversion Formula for Metric Displacement to CID:
Cubic Centimeters (cm³) × 0.06102 =CID
Displacement in Liters × 61.02=CID
Conversion of CFM to CMM multiply by 0.0283
Installation
Guide
The air precleaner is sized according to the engine airflow ratings and not according to the air intake pipe size.
The air precleaner must not be mounted flush against any surface of the equipment as clearance is needed for the discharge of debris, dirts, dust. A minimum clearance of 5cm is recommended.
For optimum results, vac valves, rubber valves on the filter canister, air intake system should be properly sealed/closed to prevent contaminated air from by-passing the precleaner.
Hump hoses are strongly recommended for air precleaner installed in high vibration applications.
KleanAire precleaners are self-powered & self-cleaning and it virtually requires no maintenance. However, the discharge ports should be checked periodically to ensure that it is not plugged by debris, dirt, mud (especially in moist environment)
The air precleaner is sized according to the engine airflow ratings and not according to the air intake pipe size.
The air precleaner must not be mounted flush against any surface of the equipment as clearance is needed for the discharge of debris, dirts, dust. A minimum clearance of 5 cm is recommended.
For optimum results, vac valves, rubber valves on the filter canister, air intake system should be properly sealed/closed to prevent contaminated air from by-passing the precleaner.
Hump hoses are strongly recommended for air precleaners installed in high vibration applications.
Download